For the safe and soot-free heating of instruments without flame. A mobile and environmentally friendly alternative to the Bunsen burner.

• Fast heating;
• Manual fine adjustment of the sensor sensitivity depending on the thickness of the modelling instrument;
• Energy-efficient;
• Ergonomic design.

9.1 x 20.9 x 8.9 cm; 230 V, 50/60 Hz; 100 W; 530 g.

FINO FLAMELESS complete with 4 protective caps and power cable.

Quantity    In the shopping basket

Sandwich plates, hard/soft, for comfortable bite, miniplast and bruxism splints. The hard layer is made from polyethylene terephthalate glycol (PETG) and can be built up with self-curing resin. The soft layer is made from thermoplastic polyurethane (TPU). The foils are packed in airtight aluminium pouches so that pre-drying is not necessary despite the hygroscopic properties of the material. With separating foil.
Clear transparent
ø 120 mm
50 pcs.
2.00 mm

Quantity    In the shopping basket

Instruments especially for the start in the dental professional life.

10 scalpel blades fig. 11; wax knife large; wax knife small; modelling instrument Zahle; instrument Le Cron; scalpel handle; Meriam tweezers; pencil; Antkoviak; plaster knife no. 6; soldering tweezers curved; cutter handle; flat pointed pliers; Aderer clasp bending pliers; heavy-duty wire cutter and foil scissors straight in a blue instrument case made of leather.

Quantity    In the shopping basket

Hard-elastic. To produce miniplast, occlusal, CMD, interim as well as fluoridating splints, drill/x-ray guides, anti-snoring devices and invisible retainers. Made from polyethylene terephthalate glycol (PETG). Bond to self-curing resin. No pre-drying required. Lined with separating foil.
Clear transparent
ø 125 mm
100 pcs.
1.0 mm

Quantity    In the shopping basket

Hard-elastic. To produce miniplast, occlusal, CMD, interim as well as fluoridating splints, drill/x-ray guides, anti-snoring devices and invisible retainers. Made from polyethylene terephthalate glycol (PETG). Bond to self-curing resin. No pre-drying required. Lined with separating foil.
Clear transparent
ø 125 mm
100 pcs.
1.5 mm

Quantity    In the shopping basket

The smart and mobile alternative to a conventional Bunsen burner and the alcohol/gas burner. The heating is activated by a sensor switch responding to steel-containing objects. No more open flame and instruments as well as modelling waxes stay free of soot particles.

• Heating-up time comparable to Bunsen burner;
• Mobile and immediately ready for operation;
• No changeover of handling necessary;
• Coil opening for instruments;
• Control LED for operating state;
• Protective cap for the protection of the coil opening.

8.5 x 19.5 x 8.3 cm; 230 V/50 Hz; 130 W; 600 g.

Noflame Plus complete with 2 protective caps and power cable.

Quantity    In the shopping basket

Unsterile
100 pcs.
shape 11

Quantity    In the shopping basket

Light-curing block-out and modelling resin with optimum flow properties. Can be used as spacer for bleaching splints and medicine carriers as well as for the sealing and blocking of saw and set-up models. Burns without residues, can thus also be used in prosthetics for the manufacturing of fixed and removable restorations. Telescopic wax-ups remain stable and can be picked up without distortions. Curing in the wavelength range of 380 to 470 nm.

4 application syringes each 1.5 g; 2 application cannulas ø 0.6 mm and 8 application cannulas ø 0.9 mm.

blue transparent

Quantity    In the shopping basket

Sandwich plates, hard/soft, for comfortable bite, miniplast and bruxism splints. The hard layer is made from polyethylene terephthalate glycol (PETG) and can be built up with self-curing resin. The soft layer is made from thermoplastic polyurethane (TPU). The foils are packed in airtight aluminium pouches so that pre-drying is not necessary despite the hygroscopic properties of the material. With separating foil.
Clear transparent
ø 120 mm
10 pcs.
2.00 mm

Quantity    In the shopping basket